Open Time: by appointment

Hunter HawkEye Elite®

  


The worldwide standard in wheel alignment equipment

Capture alignment measurements in 70 seconds

WinAlign® software is unmatched in the industry

Built-in support for ADAS calibrations and OEM resets

Easy-clamping, no metal-to-metal contact QuickGrip® adaptors

Configurations built for any shop space

Fully Integrated Alignment rack integration streamlines processes

HunterNet® 2 connectivity to see and manage your performance

Hunter Standard Alignment Systems

hunter proalign pronto wheel alignment system

Pronto

  • ProAlign® 2 alignment software
  • High-definition targets
  • 24-in. LCD flat panel display
  • Post-mounted console (with color printer)
  • Floor-mounted sensors (2-camera, manual-lift)
 
hunter proalign pronto ii wheel alignment system

Pronto-II

  • ProAlign® 2 alignment software
  • High-definition targets
  • 24-in. LCD flat panel display
  • Mobile console (with color printer)
  • Floor-mounted sensors (2-camera, manual-lift)
 
hunter proalign pronto iii wheel alignment system

Pronto-III

  • ProAlign® 2 alignment software
  • High-definition targets
  • 24-in. LCD flat panel display
  • Mobile console (with color printer)
  • Mobile, console-mounted sensors (2-camera, manual-lift)
 
hunter proalign presto wheel alignment system

Presto

  • ProAlign® 2 alignment software
  • 24-in. LCD flat panel display
  • Mobile console (with color printer)
  • DSP700 cordless sensors

Hunter Scissor Alignment Lifts

RX16

16,000 lb Capacity


16,000 lb capacity
2 x 9,000 lb capacity jacks
182″ 2-wheel alignment wheelbase
Flush mount only
PowerSlide and Inflation Station capable

 

RX14

14,000 lb Capacity


14,000 lb capacity
2 x 9,000 lb capacity jacks
182″ 2-wheel alignment wheelbase
Surface mount only
PowerSlide and Inflation Station capable

 

RX12

12,000 lb Capacity


12,000 lb capacity
2 x 6,000 lb capacity jacks
162″-179″ 2-wheel alignment wheelbase
Flush or surface mount
PowerSlide and Inflation Station capable

 

RX10

10,000 lb Capacity


10,000 lb capacity
2 x 6,000 lb capacity jacks
162″-179″ 2-wheel alginment wheelbase
Flush or surface mount
PowerSlide and Inflation Station capable

Product family at-a-glance

hunter smartweight elite wheel balancer

SmartWeight® Elite

Hands-free wheel and runout measurement

  • Touchscreen interface
  • Automatic CenteringCheck®
  • Hands-free wheel measurement and profiling
  • Automatic rim runout and condition check
  • TruWeight® guided weight placement
  • eCal automatic calibration
  • HunterNet® 2 connectivity
  • TPMSpecs® on-board vehicle database

SmartWeight® Pro

Space-saving hood design

  • Single-knob navigation
  • CenteringCheck®
  • (Optional) Automatic wheel dimensions and runout
  • Dial in exact weight placement
  • HunterNet® 2 connectivity
  • TPMSpecs® on-board vehicle database
  • Space-saving design

Revolution Tire Changer Provides Many Features To Streamline Operations

Product family at-a-glance

hunter tcx59 tire changer

TCX59 and TCX58

Automatic swing arm
  • FastBlast™ inflation system
  • Hybrid leverless head (TCX59 Pro)
  • Levelerless head (TCX59)
  • Automatic swing arm
  • Heavyweight chassis
  • 10-26 in. External clamping
  • PowerOut™ bead breaker
  • Full dual-disc bead press system (TCX59 Pro)
  • Locking lower demounting disk
  • 220V 2-Speed Power
 
hunter tcx51h plus table-top tire changer

TCX51H Plus

Built for truck and SUV tires
  • FastBlast™ inflation system
  • Conventional mount head
  • Manual swing arm
  • Heavyweight chassis
  • 10-26 in. External clamping
  • PowerOut™ bead breaker
  • Powerful bead press arm
  • 220V 2-speed power
 
hunter tcx53h tire changer

TCX5x “H” models

Heavyweight & powerful
  • Conventional mount head
  • Manual swing arm
  • Heavyweight chassis
  • 10-26 in. External clamping
  • PowerOut™ bead breaker
  • Bead press options to suit your needs
  • 220V 2-speed power
 
hunter tcx51e tire changer

TCX5x “E” models

Efficient & accommodating
  • Conventional mount head
  • Manual swing arm
  • 10-26 in. External clamping
  • PowerOut™ bead breaker
  • Bead press options to suit your needs
  • 220V or 110V Single-speed motor (Air models available)

Hunter Brake Lathes

Hunter Engineering’s award-winning brake lathes will keep your brake service a cut above the rest. Learn more about our on-car brake lathes, bench brake lathes and full-line of accessories, including adaptors to service most passenger cars, light-duty trucks and medium-duty applications.

Hunter AutoComp Elite® On-Car Brake Lathe

The AutoComp Elite® brake lathe from Hunter Engineering features a patented Variable-Speed Drive System and Anti-Chatter Technology to service rotors at the fastest possible speed without sacrificing quality by virtually eliminating the buildup of vibration (chatter) that can occur when machining rotors at a fixed speed.

BL Series Brake Lathe

The BL Series Bench Lathe is a combination lathe that brings speed, precision and versatility to your brake shop. The unique design of this combination lathe allows the operator to change the setup of the brake lathe from rotors to drums and vice versa with unprecedented speed and ease.

Connect with full OEM vehicle-specific procedures powered by asTech®

asTech® provides remote access to OEM scan tools and technicians to assist with diagnostics and ADAS calibrations in your shop. Static calibrations require a supported OEM or aftermarket fixture, such as the Bosch DAS 3000.

 

  • Integrated positioning cameras (select fixtures)
  • Thrust angle reference
  • Static forward-facing flat plate radar support
  • Static forward-facing corner reflector radar support
  • Static forward-facing camera support
  • Static rear/corner radar support
  • Static surround view camera support
  • Dynamic forward-facing radar support
  • Dynamic forward-facing camera support
  • Future support
  • Full diagnostic support
  • New module programming (select vehicles)
  • OEM software
  • Integrated alignment, diagnostic and ADAS final report
  • Expert tech assistance
  • Per-use charge

Remote services

Calibration

  • Expert technician help when you need it
  • Up-to-date OEM level coverage, using the same tools as the dealer
  • Secure gateway-supported connection
  • No coverage gap for new model vehicles
  • Calibration report details work completed for shop and vehicle owners

Diagnostics

  • Any OE scan tool function on-demand
  • Calibrating
  • Newest vehicle coverage

asTech® requires ADAS calibration fixtures sold separately

align-ssa-fixture-das3000.jpg

DAS 3000 Aftermarket Fixture

technician operating hunter tcx635hd

TCX635HD

Extra torque, extra speed
  • 14.5 – 24.5 in. rim diameter
  • 3.94 in. min rim hole diameter
  • 58 in. max tire diameter
  • 27 in. max width
  • 1,545 lbs. max weight
  • 9 rpm CW & CCW
  • 208-240V, 1ph, 60Hz, 20A
 

TCX645HD

Truck tires to skidders
  • 14 – 46 in. rim diameter
  • 3.94 in. min rim hole diameter
  • 90.5 in. max Diameter
  • 42 in. max width
  • 2,200 lbs. max weight
  • 10 & 5 rpm CW, CCW
  • 230V, 3ph, 60Hz, 26A

Product family at-a-glance

L451

  • Open Front – No Beam
  • 177″ 2-wheel alignment wheelbase
  • Powerslide and Inflation Station capable
 

L451L

  • Open Front – No Beam
  • 211″ 2-wheel alignment wheelbase
  • Powerslide and Inflation Station capable
 

L454

  • Closed Front Beam
  • 177″ 2-wheel alignment wheelbase
  • Powerslide and Inflation Station capable
 

L454L

  • Closed Front Beam
  • 211″ 2-wheel alignment wheelbase
  • Powerslide and Inflation Station capable

Product family at-a-glance

hunter smartweight elite wheel balancer

SmartWeight® Elite

Hands-free wheel and runout measurement
  • Touchscreen interface
  • Automatic CenteringCheck®
  • Hands-free wheel measurement and profiling
  • Automatic rim runout and condition check
  • TruWeight® guided weight placement
  • eCal automatic calibration
  • HunterNet® 2 connectivity
  • TPMSpecs® on-board vehicle database

SmartWeight® Pro

Space-saving hood design
  • Single-knob navigation
  • CenteringCheck®
  • (Optional) Automatic wheel dimensions and runout
  • Dial in exact weight placement
  • HunterNet® 2 connectivity
  • TPMSpecs® on-board vehicle database
  • Space-saving design

    hunter road force elite diagnostic wheel balancer

    Road Force® Elite at-a-glance

    Perform a Road Force® test and balance faster than any traditional balancer

    Solve vibration problems and provide the “new car ride” using the diagnostic load roller

    Automatically measure wheel dimensions with the patented vision system

    Ensure proper centering with patented automatic CenteringCheck®

    Weight locations identified anywhere along the wheel

    Maximize efficiency using SmartWeight® technology

    TPMSpecs® on-board vehicle database

    True self-calibration with patented eCal auto-calibration

    HunterNet® 2 online portal tracks revenue, results, ROI and more

     

We offer various convenient financing options, for both, personal and business customers